Wall mounted 8port NAP box Outdoor box
The NAP Box is used as the termination point for the feeder cable to connect to the drop cable in the FTTx communication network system. Fiber splicing, splitter, and distribution can be done in this box, and meanwhile it provides protection for the FTTx network building.
Features:
1.Total closed structure.
2.Material: PC + ABS, moisture-proof, waterproof, dust-proof, anti-aging, protection level up to IP65.
3.The Cdo has a clamp to hold the input cable, it contains splice trays and a comb to hold the optical splitter, it also has a storage place for the pass-through cable.
4.The cable, pigtails work through their own paths without disturbing each other, the micro type PLC splitter installation makes maintenance easy.
5.The distribution panel can be flipped up, the feeder cable can be put through the input port, easy for maintenance and installation.
6.The box can be installed by the way of wall-mounted or post-mounted, suitable for indoor and outdoor use.
Specification:
1.Environmental requirement:
Working temperature: -40 ℃ ～ + 85 ℃
Hygrometry: ≤85% (+ 30 ℃)
Atmospheric pressure: 70KPa ~ 106Kpa
2.Main technical data sheet:
Insertion loss: ≤0.15dB
UPC return loss: ≥50dB
APC return loss: ≥60dB
3.Technical data sheet for lightning:
The insulation resistance between the grounding device and the metal parts of the case is not less than 2MΩ / 500V (DC); IR≥2 MΩ / 500V.
The voltage resistance between the grounding device, and the box and its metal parts is not less than 3000V (DC) / min, no puncture, no flashover; U≥3000V
Configuration Tables:
Model | Dimensions A*B*C | Max capacity | Direct installation Dimension
| Wall installation F * G * H | Diameter cable Larger (mm) |
SP-16 10-8H | 343*239*95mm | 8 (SC/APC 1/8) | 221*265mm | 61*274mm | 13 |
Installation Way:
Pole Mount, Wall mount
Hot Tags: wall mounted 8port nap box outdoor box manufacturers, suppliers, factory, wholesale, customized, buy, bulk, in stock, free sample
