Shenzhen Spring Optical Communication Co.,Ltd
Call us on:+86-755-23736240   E-mail: sales@springoptic.com
Products

SP-7000 Fiber Optic Surface Microscope/fiber End Face Detector

SP-7000 Fiber Optic surface microscope/fiber end face detector SP7000 series can enlarge fiber end by 200x,400x or 800x magnification. Baseline is according with end face diameter measured on 8inch screen. Then enlarged picture of fiber end face is showed on display through video signal. Finally...

Parameter

SP-7000 Fiber Optic surface microscope/fiber end face detector 

 

SP7000 series can enlarge fiber end by 200x,400x or 800x magnification. Baseline is according with end face diameter measured on 8inch screen.

 

 Then enlarged picture of fiber end face is showed on display through video signal. Finally fiber end defects can be easily found at a glance on the display. 

 

SP7000 series start work when power on. No cables between display and microscope makes it easy to manipulate, fast to work,and most of all greatly enhances work efficiency.

 

SP7000 series can quickly check blemish, scratch and chipping etc. defects on fiber jumper and fiber ferrule. Operators just need to visually inspect fiber end on LCD screen instead of directly view on it. Therefore no harm on human eyes. As well known, harm is made by laser in fiber when operators directly view fiber end.

 

Technical parameters and specifications

 

model

SP-7000A


SP-7000C

magnification

400X


400X

X/Y axis adjustable

-


Y

Image input/output format


Analog PAL

CCD resolution


1/3"420 lines

Image output port



RCA

Image input port



RCA

Focus mode


Manual

Image analysis



-

Power consumption



3W

Operating temperature


+10℃ ~ +50℃

Storage temperature


0℃ ~ +55℃

Input port



Y

Display


8"TFT 800*600 PIX

Power supply


DC12

Size


288mm*230mm*190mm

Weight



4kg

 

Remark: “Y” indicates function enabled; “-” indicates function disabled. 

 


 
Related Products:

fiber optic production line equipment.jpg


Spring Optical Communication is one of the largest and best sp-7000 fiber optic surface microscope/fiber end face detector manufacturers and suppliers with rich experience. Welcome to buy our high quality products or wholesale our customized sp-7000 fiber optic surface microscope/fiber end face detector in stock with our factory. Also, free sample is also available if necessary.
Hot Tags: sp-7000 fiber optic surface microscope/fiber end face detector manufacturers, suppliers, factory, wholesale, customized, buy, bulk, in stock, free sample
Related Products

Product Categories

Fast Track

  • Feedback
    Shenzhen Spring Optical Communication Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 1306, 13th Floor, Mingjun Business Center, Langrong Crossing, Dalang Community, Longhua New Area, Shenzhen, Guangdong, China (Mainland)
    Tel: +86-755-23736240    
    Fax: +86-755-21002710    
    E-mail: sales@springoptic.com
Copyright © Shenzhen Spring Optical Communication Co.,Ltd